Zurich Instruments
SHFSG+ 8.5 GHz Signal Generator 訊號產生器
主要特徵
- 4 或 8 個輸出通道，最多控制 8 個量子位元
- 工作範圍為 DC 至 8.5 GHz，頻寬為 1 GHz，無需混頻器校準。如果需要頻率 >8.5 GHz，請與我們聯絡。
- 高保真門的低相位噪音和低雜散音調
- 短門脈衝高輸出功率，無需外部放大
- 6 GSa/s 的 14 位元輸出
- 透過 LabOne ® Q 軟體、LabOne 或適用於 Python、C、MATLAB ®、LabVIEW™ 和 .NET的 LabOne API 進行控制
規格
Signal Outputs
| Number of RF outputs | 4 (SHFSG-4 model) 8 (SHFSG-8 model) |
| Frequency range | DC – 8.5 GHz |
| Signal bandwidth | 1.0 GHz |
| Output ranges (dBm) | -30 dBm to +10 dBm |
| Output impedance | 50 Ohm |
| Number of synthesizers | 4 (both models) |
| D/A conversion | 14 bit, 6 GSa/s (after internal 3x interpolation) |
| Output level accuracy | ±(1 dBm of setting) |
Markers and Triggers
| Marker outputs | 1 per channel, SMA output on front panel |
| Marker output voltages | 0 V (low), 3.3 V (high) |
| Marker output impedance | 50 Ohm |
| Marker output rise time | 300 ps (20% to 80%) |
| Trigger inputs | 1 per channel, SMA on front panel |
| Trigger input impedance | 50 Ohm / 1 kOhm |
Waveform Generation
| AWG cores | 1 per channel |
| Waveform vertical resolution | 14-bit analog + 2-bit marker |
| Waveform memory | 98 kSa per channel |
| Sequence length | 32k instructions per AWG core |
| AWG sampling rate | 2 GSa/s |
| Minimum waveform length | 32 Sa |
General
| Dimensions | 449 x 460 x 145 mm (19″ rack) 17.6 x 18.1 x 5.7 inch |
| Weight | 15 kg (33 lb) |
| Power supply | AC: 100-240 V, 50/60 Hz |
| Supported clock frequencies (external or internal) | 10 MHz or 100 MHz |
| Connectors | SMA on front and back panel for trigger, signals and external clock 32 bit DIO 1 ZSync 1 GbE USB 3.0 Maintenance USB |
